Configure New Wireless Interface

User can access the Wireless Interface from the dropdown menu by clicking on the tab when editing the Branch devices (HSA/UA).

Wi-Fi Radio Settings Section

Step 1 – Settings of Radio Interface

• User can now configure the below settings to enable the Wi-Fi Radio Settings.

The Radios field are explained below:

Section	Fields	Description
Radio0 (2.4Ghz) /  Radio1 (5Ghz)
	Country	country code determines which channels you can configure on the radios.
	Channel	Radio frequency (RF) channels
	Power	The transmit power of a radio
	Enable (Check box)	Tick to enable the Wi-Fi radio

.

Wi-Fi SSID Settings Section

Step2 – Create SSID

• To create new SSID , click on the  button as show below .

• Configure the below settings and click on and  button to push the config to the CPE.

The fields of the New SSID List are explained below:

Fields	Description
SSID	Its service set identifier- text to broadcast
Security	Open : authentication without a passphrase WPA2-PSK: authentication uses a pre-shared key on the security device to permit access to the SSID WPA1/WPA2-PSK : authentication uses a pre-shared key on the security device to permit access to the SSID WAP2-EAP-RADIUS : Radius authentication uses as proxy to permit access to the SSID
SSID Mode	AP Mode: HSA/UA CPE broadcast SSID STA Mode : HSA/UA CPE works a Wi-Fi station (Connects to a home/Office Wi-Fi SSID)
Optional Settings	Broadcast SSID: Broadcasting the SSID displays the name of your network in the list of available networks VLAN/Network: A virtual LAN is any broadcast domain Client Isolation : is a security feature that prevents wireless clients from communicating with one another

.

Global Wi-Fi SSID Settings

The global Wi-Fi settings displays the created Wi-Fi template.