Provisioning Orchestrator (Gateway / SD-Branch)
User can attach the topology template In mfusion while provisioning Gateway or SD-Branch in orchestrator. Using the predefined topology templates, user can start configuring the device with 3 different methods which are:
Empty template: This template allows user can configure network interface, firewall, system settings, hotspots and VPN from beginning.
Default template: This template loads with predefined network interface, basic firewall rules & system settings configurations and also can edited. User can configure the switchports, routes, hotspot and SD-WAN if required.
From the Host: This template allows the user to clone the configuration from the pre-configured device to the provisioning device.
.
Procedure – Import Hosts
- User can navigate to ‘Orchestrator > Configuration > Gateway / SD-Branch’ submenu, >
- Click ‘New Gateway / Branch’ button
- Select the host from the ‘Available Hosts‘ window and the Topology Template (Empty/Default/From Host)
Procedure – Import config
- User can select a single/multiple host by clicking the checkbox ‘‘
- Click on the button and click button as show below to import config. Refer to Backup_Config link to backup configuration.
The ‘Mass Host Update‘ popup screen appears as shown below
- User can click on the ‘Update Host‘ from the dropdown list and select ‘Import Config‘.
- Browse the previous backup config, key in the ‘password‘ for the same and click on .
- User can delete the uploaded config by clicking on button
- Navigate on the host menu icon and click on ‘Resync Config‘ menu to swap the uploaded config as the host’s default/start-up config.