Wireless WAN

Mobile Interface configuration is only available for host types with HSA/UA Template. This is where the device settings are configured for the SIM card using LTE and WWAN.  4 sim slots are available, LTE0 (4G-SIM2), LTE1 (4G-SIM1), WWAN0 (4G/5G-SIM1), and , WWAN1 (4G/5G-SIM2).

User can access the Mobile Interface from the dropdown menu by clicking on the tab when edit the SDWAN Edge. User can click the interface name in the ‘Interface‘ column to edit it.

Image 1: List of Mobile Interfaces

The fields of the Mobile Interface List are explained below:

S/NFieldsDescription
01.InterfaceLists the Mobile of interfaces available
02.Admin Statusinterface Status is enabled/disabled
03.ModemRemote device modem type
04.APNAccess Point Name is the name of a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network.
Table 1 : The Fields of Mobile Interface List

Setting of Mobile Interface

To configure the Mobile interface, click on the list under the ‘Interface‘ column as in Image 1.

Image 2 : New/Edit Mobile Interface Page

The fields of the each Interfaces are explained below:

S/NInterfacesFieldsDescription
01.lte0 (4G-SIM2) / lte1 (4G-SIM1)
Interface NameEditing Interface Name
ModemRemote device modem type
Optional SettingsAPN : Access Point Name is the name of a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network.
IP Mobile :
5G / NR Bands :
02.wwan0 (4G/5G-SIM1) / wwan1 (4G/5G-SIM2)
Interface NameEditing Interface Name
5G/NR Disable Mode
5G/NR Preferred Mode
Optional SettingsAPN : Access Point Name is the name of a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network.
IP Mobile :
5G / NR Bands :
Table 2 : The Fields of LTE & Wwan List